Month: October 2018

Custom PP Bottle(KEXON) add a great deal to your packaging because when you get a bottle custom designed you show that you have so much confidence in your product that you are willing to do a little more to add to the success of your product. All kinds of PP Bottle in different sizes can be custom made including PET, HDPE, LDPE, PP, PVC and mixed resins. And when your product is packaged in a unique bottle, you automatically make sure that you stand out in the crowd.

Custom PP Bottle helps in product differentiation

Many manufacturers specialize in minimum runs of custom PP Bottle that are made according to a particular design. However, you do get some manufacturers and distributors who will give you short runs that are important when you want to do product sampling or test the market. These are not necessarily expensive and you can find manufacturers who will give you the number you require in the design that you want. Custom designed PP Bottle have many advantages including: Style, Custom colors, Size, Closures, Material, Neck and shoulder size and style, Complete design.

You can opt for long and tapering bottles or short and squat ones and the whole range in between, clear or opaque, narrow necks or straight sided and other design options. Typically, the custom PP Bottle are made with special molds though the injection blow molding process or extrusion blow molding or perform. Different processes are used for different materials and also one process will be favored over the other depending on the number required.

Click Trigger Sprayer to learn about more information

The purpose of the different existing treatments in the industry is to improve the protective properties of metal surfaces , providing new functional features to facilitate subsequent treatment or provide a decorative finish .To this purpose parts are treated in baths/tanks of different nature, which usually contain highly corrosive liquids.KEXON manufactures very sturdy centrifugal Plastic Pump(KEXON) with all parts in contact with fluid made out of plastics fully compatible with these fluids.

The range of flow rates available ranging from small pumps for punctual transfers (1 m3/h) to high flow process pumps (1.200 m3/h) .Depending on the type of treatment applied to metals (pickling, galvanizing, anodizing, chrome, …) , different types of fluids such as hydrochloric acid, sulfuric acid , caustic soda , chromic acid, etc are used.

A typical application in this sector is the liquid recirculation within treatment baths. The purpose is to maintain a constant temperature in the baths and, in some cases , to eliminate solid particles generated in the pickling process .Once the flow rates , pressures and temperatures are defined, our Technical Department selects the most suitable material for the application. We have extensive experience in the manufacture of plastic pumps in PP , PVDF, HDPE (RCH1000) , PVC and Halar .

Horizontal plastic pumps:We manufacture complete pumps horizontal arrangement , according to EN- 22858 / ISO 2858, with single or double mechanical seals, complete with baseplate, elastic coupling and motor. Our manufacturing system allows us to configure the pumps to customer demand, that is, we can assemble mechanical seals, couplings and motors according to costumers and/or engineerings requirements.

Click Mini Trigger Sprayer to learn about more information

The capacities of these Cream Jar(KEXON) range from 10ml all the way up to 200ml, and all the numbers in between. Some containers will be wide while others will be taller, and that depends on the shape that is originally chosen. The majority of jars purchased are 15, 25 or 30ml containers, but other sizes are utilized as well. An example of a popular size is the 15ml UFO shaped acrylic jar, which is 56mm in diameter and 29.5mm in height. This can be compared to a 15ml circular acrylic jar, which is 62.5mm in diameter and 36mm in height. There are also inner jars that can be molded into the acrylic so that they take a different shape inside than they have on the outside.

The sizes of these Cream Jar vary, which makes them perfect for holding a variety of different cosmetics. For example, smaller jars are generally great for things like cosmetic glitter, but larger jars are great for eye creams. The different sizes available include 1ml – 20ml, 30ml – 50ml, 60ml – 100ml, 110ml – 150ml, 160ml – 200ml.

There are sizes available in between each of these numbers, and the shapes available will differ for each size. Most manufacturers choose their jar size based on the cost of the material they are selling and the volume that they want to sell in each container.

The closures for Cream Jarare normally plastic or aluminum and come in a variety of different colors. Most caps will match the jar, but some are made in simple solid colors. These easily twist on and off so that they stay secure and keep the cream inside safe without risk of it easily leaking out. Snap on closures are available, although they are not as popular as those that twist for a secure fit. Once the lid is off, the circular opening of the container will make it easy for users to slip their fingers inside.

Clear containers are among the most popular, but jars that have a frosted clear coat are rapidly increasing in popularity. There are also different colors of containers that include: silver, purple, blue, gold and many others. The lids for the containers may match the color of the jar, but that depends on the specific jar that is chosen. Most lids are solid black or white, as these are generally the most affordable.

Click PE Bottle to learn about more information

The contents of the Airless Bottle(KEXON) can be completely isolated from the air, avoiding the oxidative deterioration of the product due to exposure to air, breeding bacteria, and upgrading the product with its high-tech concept.

The Airless Bottle that is used in the market consists of a cylindrical ellipsoidal container plus a piston placed at the bottom. Its design principle is to use the contraction force of the spring, and does not allow air to enter the bottle, causing a vacuum state, and using atmospheric pressure to push the piston of the bottom of the bottle to advance. However, due to the spring force and atmospheric pressure, sufficient force cannot be given, so the piston cannot fit too tightly with the bottle wall, otherwise the piston will not be able to rise and advance due to excessive resistance; on the contrary, if the piston is easy to advance and is prone to leakage, Therefore, Airless Bottle have very high requirements for the professionalism of the manufacturer.

Plastic bottles are mainly made of materials such as polyethylene or polypropylene and added with various organic solvents. Polyethylene (PET), polyethylene (PE) and polypropylene (PP) are widely used as raw materials in plastic bottles. After adding the corresponding organic solvents, they are heated at high temperature and then blown, blown, or injection molded through plastic molds. Plastic container.It is mainly used for liquid or solid disposable plastic packaging containers such as beverages, food, pickles, honey, dried fruits, edible oils, agricultural veterinary drugs. Plastic bottles are characterized by being difficult to break, low cost, high transparency, and food grade raw materials.

Ningbo KeXon Plastic Co., Ltd. is a comprehensive plastic packaging enterprise integrating design, production, and sales. We own a factory (Yuyao KeXon Sprayer Factory), and its plant area is over 6,000 square meters, with more than 20 years of production experience in various types of daily packaging. The company can professionally produce all kinds of foam pumps, plastic caps, daily and medicinal plastic bottles, as well as all kinds of trigger sprayers, lotion pumps, perfume sprayers, cream jar and other products.

Click Acrylic Bottle to learn about more information

If you are packaging a drink, you to need to customize empty PE Bottle(KEXON), because attractive packaging is crucial for many drink. Whether you are packaging a carbonated drink or soda or premium liquor you need that edge customization gives to grow your sales. This customization may be in the form of specially designed bottles, corks or closures, the labeling and printing and even the secondary packaging, where required. Many premium liquor bottles are packaged in cardboard that also affords protection against breakage as numerous bottles are made of glass.

You may find all companies do not meet your requirements as some firms may specialize in only glass bottles and some in PE. They may require minimum orders, especially if you require specialization in custom design; otherwise the whole process may work out too expensive. You may require custom blow or injection molding or custom glass shapes that lend to product differentiation. Or you may require exclusive closures that add to the customer interest.

Ningbo KeXon Plastic Co., Ltd. is a comprehensive plastic packaging enterprise integrating design, production, and sales. We own a factory (Yuyao KeXon Sprayer Factory), and its plant area is over 6,000 square meters, with more than 20 years of production experience in various types of daily packaging. The company can professionally produce all kinds of foam pumps, plastic caps, daily and medicinal plastic bottles, as well as all kinds of trigger sprayers, lotion pumps, perfume sprayers, cream jar and other products.

Click Cream Jar to learn about more information

Airless Bottle(KEXON) and jars use a non-pressurised vacuum for dispensing liquids. This exciting system creates a pump action that works as an all-in-one bottle and pump mechanism.

To put things into perspective, this airless bottle allows you to dispense the contents without taking off the lid when the contents is low. The benefits also outway the traditional pump and spray bottle solutions that are on the market today.

No dip tube required

The bottle and pump is light in weight

Up to 15% increased shelf life (No excessive exposure to air)

The vacuum dispensing effect draws the product out to create less wastage

Luxury packaging solution

Can be recycled

Single, Dual or Triple airless bottles allow for many cosmetic solutions in one container

The liquid contents do not touch any metal springs which can cause oxidization problems

No back-flow problems, solving air flow going back to the bottle after pumping. (This gives the contents less shelf life)

You can use less or no chemical preservatives allowing for organic and natural products

It doesn’t matter if the bottle lies on its side or stored upside down due to the vacuum dispensing effect.

Ningbo KeXon Plastic Co., Ltd. is a comprehensive plastic packaging enterprise integrating design, production, and sales. We own a factory (Yuyao KeXon Sprayer Factory), and its plant area is over 6,000 square meters, with more than 20 years of production experience in various types of daily packaging. The company can professionally produce all kinds of foam pumps, plastic caps, daily and medicinal plastic bottles, as well as all kinds of trigger sprayers, lotion pumps, perfume sprayers, cream jar and other products.

Click Acrylic Bottle to learn about more information

In the Northern Hemisphere winter is finally relinquishing the world from its icey grips, leaving grass and soil where there was once snow and ice. Spring gardeners will be among the first to take advantage of the unfrozen ground, planting seedlings and tending to plants that survived the winter. In feeding and watering their gardens, many keep a Trigger Sprayer(KEXON) on hand. Trigger sprayers are valued tools in the garden and in caring for houseplants as well.

As a tool for feeding plants and misting their leaves and flowers, it is hard to beat the trigger sprayer, as a hose, while very capable of watering soil, will be too clumsy and overwhelming in its stream of water for delicate seedlings. The trigger sprayer, on the other hand, is portable, and the misting action of the nozzle releases just enough water in a fine mist to cover the leaves and flowers without drowning them. People forget that overwatering can be just as dangerous to your garden’s heath as underwatering.

A trigger sprayer is a gardening implement that is easy to use. You simply mix plant food into water in the bottle, screw on the trigger device, and adjust the nozzle to the quality of spray you desire, which may differ depending upon the type of plant you are watering. Unlike an unwieldy gardenhose, the trigger sprayer is also highly portable, and can be lifted to water hanging plants, or used indoors without causing mess.

Moreover, the tripper sprayer is easy to clean. Simply rinse it out and re-use, or put it in the dishwasher if extra cleaning is needed for insecticides. The durable plastic means it will have a long life, and can be stored out of doors or in a tool shed or garage. Its size makes is storable just about anywhere.

Click PP Bottle to learn about more information

The main development direction of transparent PE Bottle(KEXON) is the packaging of pharmaceutical packaging, beverage packaging and health care products. Another trend is to replace recycled plastics with degradable plastics.

Ordinary cosmetics and detergent packaging containers are mostly made of high-density polyethylene. In order to meet the packaging requirements of different products, the materials used in PE Bottle are also increasingly enriched. Since transparent PE Bottle containers allow consumers to clearly see the contents, consumers are increasingly demanding transparen PE Bottle containers, and transparent polypropylene is the main material to meet this requirement, and the development of pp transparent packaging bottles. It is a hot spot in PE Bottle packaging at home and abroad in recent years. Highly transparent polypropylene container with good transparency and gloss, and is very popular and popular. How to stand out in the modern market where competition is fierce and sales methods are constantly evolving.

In addition to relying on product innovation and high-quality, fast service to win, transparent packaging is becoming more and more important. From the market point of view, packaging is a form product in the whole product, and it is a very important part. Through it, consumers can generate purchasing desires and stimulate consumption. It has been proved that transparent packaging often stimulates consumption and creates purchasing power. Transparent packaging is fully transparent and partially transparent. It is a transparent packaging material that partially or completely displays the product form of the food. It enables the purchaser to directly see the image, color and quality of the food, which can reflect the natural beauty of the product. It is also convenient for customers to identify and purchase. Such as transparent plastic food bottles, candy cans, wine bottles, etc. at a glance, so that consumers can not help but generously, sales have skyrocketed.

Click Cream Jar to learn about more information

The lids to plastic bottles are made of different grades of plastic than the bottle itself. Mixing lids in with plastic bottles will diminish the value of bottle-grade plastic collected in that fashion. Plastic Caps(KEXON) can be recycled separately through the Aveda Recycle Caps program.

AVEDA Recycle Caps Program accepts bottle caps that are rigid polypropylene plastic, sometimes noted with a 5 in the chasing arrows recycling symbol. This includes caps that twist on with a threaded neck such as caps on shampoo, water, soda, milk and other beverage bottles, flip top caps on tubes and food product bottles (such as ketchup and mayonnaise), laundry detergents and some jar lids such as peanut butter.

Ningbo KeXon Plastic Co., Ltd. is a comprehensive plastic packaging enterprise integrating design, production, and sales. We own a factory (Yuyao KeXon Sprayer Factory), and its plant area is over 6,000 square meters, with more than 20 years of production experience in various types of daily packaging. The company can professionally produce all kinds of foam pumps, plastic caps, daily and medicinal plastic bottles, as well as all kinds of trigger sprayers, lotion pumps, perfume sprayers, cream jar and other products.

Click Lotion Pump to learn about more information

The Lotion Pump(KEXON) is also generally called a hand sanitizer pressure pump. It can be used almost everywhere in life, like cosmetics, skin care products, detergents, and other aspects. When using, we first press the air in the liquid storage chamber (that is, the plastic tube that can wash the hair water). When the air is exhausted, press the pump head again. After the loose hand, the spring in the pump head. To restore the original state, a vacuum will be formed in the liquid storage chamber to generate a negative pressure. At this time, the pressure in the container is consistent with the atmospheric pressure, and then the pressure in the liquid storage chamber is small and the pressure inside the container is large. Due to the pressure difference, the atmosphere will press the liquid around the reservoir cavity into the reservoir, giving the impression that the pump head sucks up the liquid.

The specific principle is as follows: First press-When we press the actuator for the first time, we push the sub-stem together with the main stem to compress the spring. During the compression spring, the outer wall of the piston rubs against the inner wall of the body to urge the piston to open the discharge hole of the sub-stem; when the piston slides down, the body is discharged through the secondary sub-stem discharge hole; Reciprocating multiple presses- all the air in the body is discharged.

Aspirate-After pressing the actuator through the main stem, the sub-stem, the piston, the common compression spring to discharge the air in the body , release the actuator, the spring moves upward due to the loss of pressure. At this time, the piston also moves downward through the inner wall of the friction body, and the sub-stem The discharge hole is closed; at this time, the liquid storage chamber in the body forms a vacuum suction state, and the glass ball. Store the liquid-press the head several times, and store the liquid to the body by multiple aspirations until the liquid is full. Discharge-when the liquid in the body reservoir is full, press the actuator again and the liquid passes through the discharge hole directly from the actuator.

Click Trigger Sprayer to learn about more information