Trigger Sprayer Uses

Depending on your product’s application, there is a Trigger Sprayer(KEXON) that will suit the job. Trigger spray bottles are used across a number of different industries, including the pharmaceutical, cosmetic, household products, animal care and health, automotive, industrial, cleaning products, livestock, and horticultural markets. They come in a wide variety of sizes and shapes, depending on the type of product, and are even available in ergonomic shapes.

The purpose of a trigger sprayer is to make the dispensing of your drugs and other liquid products easier for patients because of their targeted or diffuse spray functions. The unique part of trigger sprayers is that they can be attached to a variety of plastic bottles. They also have different sized holes and closures that enable liquids of multiple viscosities to be easily sprayed.

With this wide variety of sprayers, you can produce mists, sprays, or streams of liquids depending on the specific need. What is also helpful is the fact that you can control the settings through the use of the closure, so any dispensing of the liquid is easily done because of the tight seal with the bottle.

Bottles aren’t the only thing that consumers place high importance on. They also look at the closures and trigger sprayers. Studies have shown a strong link between the performance of the trigger sprayer and the overall performance of the product itself. And like caps and closures, the trigger sprayer is most often the part that can cause customer dissatisfaction when they fail to work properly.

Click Cream Jar to learn about more information

Daily Maintenance of Foam Pump

Foam Pump(KEXON) is used in various flotation processes and is an ideal pump for transporting foam slurry. The conveying capacity is far higher than that of other products, and no shaft seal or shaft seal water is needed. Therefore, in order to ensure the safe operation of the pump in daily work, it is also necessary to pay attention to the daily maintenance, and the maintenance of foam pump is also very simple. First of all, attention should be paid to the adjustment of the impeller. In order to ensure the efficient operation of the pump, the gap between the impeller and the guard plate must be adjusted in time. Secondly, add appropriate amount of grease during operation. Finally, if the foam pump is not used for a long time, the bearing should be rotated 1/4 turn by hand every week to make the bearing bear static load and external vibration evenly.

These are the maintenance and maintenance methods that can make the foam pump better used and prolong the service life of the foam pump.

Ningbo KeXon Plastic Co., Ltd. is a comprehensive plastic packaging enterprise integrating design, production, and sales. We own a factory (Yuyao KeXon Sprayer Factory), and its plant area is over 6,000 square meters, with more than 20 years of production experience in various types of daily packaging. The company can professionally produce all kinds of foam pumps, plastic caps, daily and medicinal plastic bottles, as well as all kinds of trigger sprayers, lotion pumps, perfume sprayers, cream jar and other products.

Click Trigger Sprayer to learn about more information

What are the Inspection Methods for Cosmetic Plastic Pump Packaging?

As a fashionable consumer goods, cosmetics not only need exquisite packaging, but also need to protect the products during transportation or shelf life. Now combined with the requirements of cosmetic Plastic Pump(KEXON) packaging testing and application, the test items and inspection methods are summarized. Cosmetic packaging is expected to help cosmetic manufacturers and cosmetics packaging suppliers in packaging inspection and quality control.

First, cosmetics transport packaging testing: Cosmetics must be transported, shelf display and other links to reach the hands of consumers, you need to have good transport packaging. At present, the transportation and packaging of cosmetics are mainly corrugated boxes, and the main test indicators are the compressive strength and stacking test of the carton.

The carton needs to be stacked in the process of storage and transportation. In the lowest layer, the carton must withstand the pressure of the upper carton. In order not to collapse, it must have suitable compressive strength after stacking, so stacking and maximum pressure are carried out. The double detection of the collapse is very important.

Second, cosmetics self-adhesive label testing: Self-adhesive labels are widely used in cosmetic packaging. The testing items are mainly for the adhesion test of self-adhesive labels (stickers or pressure-sensitive adhesives). The main testing items are: initial tack properties, holding properties, Peel strength (peeling force) three indicators.

Third, cosmetic packaging printing quality inspection: Cosmetics have a good visual aesthetic and are beautifully printed. It is more important for the detection of printing quality. At present, the conventional items for the quality inspection of cosmetic printing are the abrasion resistance (scratch resistance) of the printing ink layer, the adhesion fastness detection, and the color discrimination.

Click Cream Jar to learn about more information

Acrylic Material is Injection-Molded Plastic Pump Bottle

Acrylic material is injection-molded Plastic Pump(KEXON) bottle, chemical resistance is poor, generally can not directly paste the paste, need to be equipped with a liner barrier, filling is not too full, prevent the paste from entering between the liner and the acrylic bottle, so as not to occur Cracking, high packaging requirements during transportation, it looks particularly obvious after scratching, high permeability, and the upper wall is very thick, but the price is quite expensive.

At present, the PETG injection molding process of cosmetic bottle manufacturers is relatively stable, and does not require a specially designed injection molding machine. The injection temperature is only about 215 ° C ~ 235 ° C, and the PC injection molding process is not easy to control, the injection temperature is as high as 280 ° C, In contrast, they can save power even better. PETG does not easily generate internal stresses during injection molding, which is determined by their molecular structure and their excellent ductility. PCs are more prone to internal stresses, and more than one internal stress post-processing procedure is eliminated. The internal stress of injection molded products is very dangerous, and the serious situation is stress cracking, which will increase unnecessary complaints or claims from customers.

Ningbo KeXon Plastic Co., Ltd. is a comprehensive plastic packaging enterprise integrating design, production, and sales. We own a factory (Yuyao KeXon Sprayer Factory), and its plant area is over 6,000 square meters, with more than 20 years of production experience in various types of daily packaging. The company can professionally produce all kinds of foam pumps, plastic caps, daily and medicinal plastic bottles, as well as all kinds of trigger sprayers, lotion pumps, perfume sprayers, cream jar and other products.

Click Lotion Pump to learn about more information