How to Prevent Aging of Handheld Trigger Sprayer

Handheld Trigger Sprayer(KEXON) manufacturers’ products are very widely used in our life, mainly for water spray, etc., but because plastic products are prone to aging if they are not noticed, how to avoid it when using What about aging?

In order to solve the aging problem, manufacturers often add some anti-aging agents when making sprayers to slow down their aging speed. In fact, this has not solved the problem fundamentally. In order to make the sprayer durable, it is mainly used properly, not exposed to the sun, not allowed to rain, not on the fire or on the heating. Sometimes the residual pesticide will also corrode it, so pay attention when using it. Be clean. In addition, it is not allowed to collide with force, nor can it be exposed to the sun at high temperatures, the collision is easy to break, and the exposure is easy to accelerate its aging, thereby shortening the service life.

Ningbo KeXon Plastic Co., Ltd. is a comprehensive plastic packaging enterprise integrating design, production, and sales. We own a factory (Yuyao KeXon Sprayer Factory), and its plant area is over 6,000 square meters, with more than 20 years of production experience in various types of daily packaging. The company can professionally produce all kinds of foam pumps, plastic caps, daily and medicinal plastic bottles, as well as all kinds of trigger sprayers, lotion pumps, perfume sprayers, cream jar and other products.

Click Plastic Pump to learn about more information

Trigger Sprayer Bottle Check Valve in Pump System

Trigger Sprayer(KEXON) bottles are downstroke, the piston pushing in, shrinks the area of the cylinder, forcing fluid out of the pump. The upstroke, the spring pushing the piston back out, expands the cylinder area, sucking fluid into the pump. In a spray bottle, you need to suck cleaning fluid in from the reservoir below and force it out through the barrel above. In order to get all of the fluid moving through the barrel, the pump must only force the fluid up — it cannot force the fluid back into the reservoir. In other words, the fluid must move through the pump in only one direction.

The device that makes this possible is called a one-way valve. A Trigger Sprayer bottle has two one-way valves in the pumping system: one between the pump and the reservoir and one between the pump and the nozzle. Typically, the valve between the pump and the reservoir consists of a tiny rubber ball that rests neatly inside a small seal. The sides of the seal are angled so that the ball won’t fall through. Depending on the design, either gravity or a small spring holds this ball against the seal so that the water passageway is blocked off when you are not pumping. When the piston moves out (when you release the trigger), the expanding area of the cylinder sucks on the fluid below, pulling the ball up out of the seal. Since the ball is lifted up, fluid is free to flow from the reservoir. But when you squeeze the trigger, the outward force of the moving fluid pushes the ball into the seal, blocking off the passageway to the reservoir. Consequently, the pressurized fluid is pushed only into the barrel.

Click Lotion Pump to learn about more information

Trigger Sprayer Uses

Depending on your product’s application, there is a Trigger Sprayer(KEXON) that will suit the job. Trigger spray bottles are used across a number of different industries, including the pharmaceutical, cosmetic, household products, animal care and health, automotive, industrial, cleaning products, livestock, and horticultural markets. They come in a wide variety of sizes and shapes, depending on the type of product, and are even available in ergonomic shapes.

The purpose of a trigger sprayer is to make the dispensing of your drugs and other liquid products easier for patients because of their targeted or diffuse spray functions. The unique part of trigger sprayers is that they can be attached to a variety of plastic bottles. They also have different sized holes and closures that enable liquids of multiple viscosities to be easily sprayed.

With this wide variety of sprayers, you can produce mists, sprays, or streams of liquids depending on the specific need. What is also helpful is the fact that you can control the settings through the use of the closure, so any dispensing of the liquid is easily done because of the tight seal with the bottle.

Bottles aren’t the only thing that consumers place high importance on. They also look at the closures and trigger sprayers. Studies have shown a strong link between the performance of the trigger sprayer and the overall performance of the product itself. And like caps and closures, the trigger sprayer is most often the part that can cause customer dissatisfaction when they fail to work properly.

Click Cream Jar to learn about more information

Daily Maintenance of Foam Pump

Foam Pump(KEXON) is used in various flotation processes and is an ideal pump for transporting foam slurry. The conveying capacity is far higher than that of other products, and no shaft seal or shaft seal water is needed. Therefore, in order to ensure the safe operation of the pump in daily work, it is also necessary to pay attention to the daily maintenance, and the maintenance of foam pump is also very simple. First of all, attention should be paid to the adjustment of the impeller. In order to ensure the efficient operation of the pump, the gap between the impeller and the guard plate must be adjusted in time. Secondly, add appropriate amount of grease during operation. Finally, if the foam pump is not used for a long time, the bearing should be rotated 1/4 turn by hand every week to make the bearing bear static load and external vibration evenly.

These are the maintenance and maintenance methods that can make the foam pump better used and prolong the service life of the foam pump.

Ningbo KeXon Plastic Co., Ltd. is a comprehensive plastic packaging enterprise integrating design, production, and sales. We own a factory (Yuyao KeXon Sprayer Factory), and its plant area is over 6,000 square meters, with more than 20 years of production experience in various types of daily packaging. The company can professionally produce all kinds of foam pumps, plastic caps, daily and medicinal plastic bottles, as well as all kinds of trigger sprayers, lotion pumps, perfume sprayers, cream jar and other products.

Click Trigger Sprayer to learn about more information

What are the Inspection Methods for Cosmetic Plastic Pump Packaging?

As a fashionable consumer goods, cosmetics not only need exquisite packaging, but also need to protect the products during transportation or shelf life. Now combined with the requirements of cosmetic Plastic Pump(KEXON) packaging testing and application, the test items and inspection methods are summarized. Cosmetic packaging is expected to help cosmetic manufacturers and cosmetics packaging suppliers in packaging inspection and quality control.

First, cosmetics transport packaging testing: Cosmetics must be transported, shelf display and other links to reach the hands of consumers, you need to have good transport packaging. At present, the transportation and packaging of cosmetics are mainly corrugated boxes, and the main test indicators are the compressive strength and stacking test of the carton.

The carton needs to be stacked in the process of storage and transportation. In the lowest layer, the carton must withstand the pressure of the upper carton. In order not to collapse, it must have suitable compressive strength after stacking, so stacking and maximum pressure are carried out. The double detection of the collapse is very important.

Second, cosmetics self-adhesive label testing: Self-adhesive labels are widely used in cosmetic packaging. The testing items are mainly for the adhesion test of self-adhesive labels (stickers or pressure-sensitive adhesives). The main testing items are: initial tack properties, holding properties, Peel strength (peeling force) three indicators.

Third, cosmetic packaging printing quality inspection: Cosmetics have a good visual aesthetic and are beautifully printed. It is more important for the detection of printing quality. At present, the conventional items for the quality inspection of cosmetic printing are the abrasion resistance (scratch resistance) of the printing ink layer, the adhesion fastness detection, and the color discrimination.

Click Cream Jar to learn about more information

Acrylic Material is Injection-Molded Plastic Pump Bottle

Acrylic material is injection-molded Plastic Pump(KEXON) bottle, chemical resistance is poor, generally can not directly paste the paste, need to be equipped with a liner barrier, filling is not too full, prevent the paste from entering between the liner and the acrylic bottle, so as not to occur Cracking, high packaging requirements during transportation, it looks particularly obvious after scratching, high permeability, and the upper wall is very thick, but the price is quite expensive.

At present, the PETG injection molding process of cosmetic bottle manufacturers is relatively stable, and does not require a specially designed injection molding machine. The injection temperature is only about 215 ° C ~ 235 ° C, and the PC injection molding process is not easy to control, the injection temperature is as high as 280 ° C, In contrast, they can save power even better. PETG does not easily generate internal stresses during injection molding, which is determined by their molecular structure and their excellent ductility. PCs are more prone to internal stresses, and more than one internal stress post-processing procedure is eliminated. The internal stress of injection molded products is very dangerous, and the serious situation is stress cracking, which will increase unnecessary complaints or claims from customers.

Ningbo KeXon Plastic Co., Ltd. is a comprehensive plastic packaging enterprise integrating design, production, and sales. We own a factory (Yuyao KeXon Sprayer Factory), and its plant area is over 6,000 square meters, with more than 20 years of production experience in various types of daily packaging. The company can professionally produce all kinds of foam pumps, plastic caps, daily and medicinal plastic bottles, as well as all kinds of trigger sprayers, lotion pumps, perfume sprayers, cream jar and other products.

Click Lotion Pump to learn about more information

How to Sterilize Lotion Pump Bottles

Empty Lotion Pump(KEXON) bottles can provide a handy container for a wide variety of uses. Prior to refilling them, however, they should first be sanitized. A little effort and some household bleach is all it takes to prepare empty lotion bottles for reuse.

1. Remove all remaining contents from the lotion bottle using hot water and soap. It may be necessary to use a pipe cleaner or similar tool to ensure that no lotion remains caked on hard-to-reach edges of the container.

2. Prepare your sterilization mixture. Add one quarter cup of bleach to every gallon of water. For smaller batches, use a tablespoon of bleach for every quart of water. You may use your sink to mix the bleach and water, provided that the sink has previously been sanitized. Otherwise, use a clean bucket or similar container.

3. Place the thoroughly cleaned, empty lotion container into the sanitizer mix. Make sure that the container fills completely and is surrounded on all sides by the bleach and water mixture.

4. Soak the lotion container for a minimum of five minutes in the sanitizer solution. For best results, allow fifteen to twenty minutes soak time.

5. Remove the lotion bottle, empty of the sanitizer mixture, and place on a towel or drying rack. Allow the lotion bottle to air dry.

Ningbo KeXon Plastic Co., Ltd. is a comprehensive plastic packaging enterprise integrating design, production, and sales. We own a factory (Yuyao KeXon Sprayer Factory), and its plant area is over 6,000 square meters, with more than 20 years of production experience in various types of daily packaging. The company can professionally produce all kinds of foam pumps, plastic caps, daily and medicinal plastic bottles, as well as all kinds of trigger sprayers, lotion pumps, perfume sprayers, cream jar and other products.

Click Cream Jar to learn about more information

New Arrival 30mm Foam Pump with PP comb Brush Launched

There are so many Foam Pump(KEXON) now which are widely used all over the world for the reason that foam pumps offer more convinience and better feeling after using. Typically, most of poam soap dispensing pumps are with a regular actuator and an over cap or plastic stopper. Or a silicon brush on the actuator with an over cap or plastic stopper. The silicon brush foam pump is popular in facial washing as the silicon brush is soft, having the functions of massaging and cleaning. We have hard soft brush pump, why not have a hard one? Therefore we produce a foam pump hard comb brush.

The neck size of the dispenser pump with a hard comb brush is 30mm. And it is very economic and environment-friendly. As the comb brush is PP material, a really comb, hard enough, it can be used in combing hair, which offers more convinience. According to the market, it is hot in hair washing, particularly in pet bady washing. Foaming pump with a comb brushi is ideal for a business.

Ningbo KeXon Plastic Co., Ltd. is a comprehensive plastic packaging enterprise integrating design, production, and sales. We own a factory (Yuyao KeXon Sprayer Factory), and its plant area is over 6,000 square meters, with more than 20 years of production experience in various types of daily packaging. The company can professionally produce all kinds of foam pumps, plastic caps, daily and medicinal plastic bottles, as well as all kinds of trigger sprayers, lotion pumps, perfume sprayers, cream jar and other products.

Click Trigger Sprayer to learn about more information

New PET Dropper Plastic Pump Bottles

This new range of PET dropper Plastic Pump(KEXON) bottles provides a lightweight and unbreakable version of our range of glass dropper bottles, available in clear, amber, blue and green glass. Sizes include a 10ml, 20ml, 30ml and 50ml. Colours available direct from stock for a minimum order of just a single carton include amber and crystal clear PET.

All bottles in the new range have the same 18mm tamper evident neck specification, which is compatible with a wide range of our standard closures including: Dropper pipettes, Tamper Evident dropper pipettes, Child Resistant dropper caps, Child Resistant Tamper Evident caps, Dropper caps with a wide choice of integral dropper inserts for precise dispensing of different liquid viscosities.

Ningbo KeXon Plastic Co., Ltd. is a comprehensive plastic packaging enterprise integrating design, production, and sales. We own a factory (Yuyao KeXon Sprayer Factory), and its plant area is over 6,000 square meters, with more than 20 years of production experience in various types of daily packaging. The company can professionally produce all kinds of foam pumps, plastic caps, daily and medicinal plastic bottles, as well as all kinds of trigger sprayers, lotion pumps, perfume sprayers, cream jar and other products.

Click Cream Jar to learn about more information

How does the Lotion Pump Work?

Lotion Pump(KEXON) start the machine, the motor drives the intermittent splitter to do intermittent rotating motion, and the intermittent splitter drives the main rotating disc and the gasket feeding disc to rotate synchronously. The gasket is fed into the gasket track through the vibrating tray, and the gasket is pressed into the gap of the gasket feeding plate under the rotating action of the micro motor installed outside the gasket track. The gasket loading plate rotates with the gasket into the slot corresponding to the main rotating plate a, the gasket falls into the notch of the main rotating plate a, and rotates to the next station with the main rotating plate, i.e. the headless pump feeding notch.

The headless pump is sent out from the vibrating tray and the linear vibrator, and enters directly below the gasket along its feeding track to rotate together to the assembly unit. The cylinder drives the press sleeve to press the gasket directly above into the headless pump to complete the assembly. Finally, the finished product is rotated to the discharge port to blow out the finished product. The gaskets enter the gasket track in sequence through the gasket vibrating tray feeder. As the micro-motor rotates clockwise, a downward external force will be applied to the gaskets in the gasket track, causing the gaskets to enter the slot of the gasket feeding tray. The gasket loading plate is linked with the bearing, gasket drum and pinion and rotates clockwise.

Click Plastic Pump to learn about more information