Method Of Preservation Of Cosmetics Plastic Pump

Cosmetics Plastic Pump(KEXON) should be placed in a place where normal temperature, dryness and sunlight cannot be directly irradiated, whether in use or unopened; if you want to add a cool feeling to the refrigerator due to summer, you should also stay away from the freezer and return it immediately after use. In the original place, avoid deterioration due to large temperature difference between the inlet and outlet. When not in use, tighten the cap and Plastic Lotion Pumps to maintain a good seal.

Contaminated products such as mascara, which are directly exposed to the eyelashes and stored in the mascara bottle, are preferably replaced three to four months.

In addition to spices and pigments, various high-grade cosmetics include fatty acids, fatty alcohols and petroleum jelly, and are incorporated into proteins, lipid compounds, various amino acids, vitamins, etc.; pharmaceuticals and cosmetics also include royal jelly, white fungus, pearls, ginseng And other organic matter. The above organic substances are not only beneficial to the skin, but also preservatives in cosmetics are sufficient to inhibit or kill harmful microorganisms such as bacteria and molds, and the products are not deteriorated in a short period of time, so that the skin is not damaged. However, if the storage time is too long, the nutrients will be oxidized and decomposed, the role of the preservative will be weakened, and in the past, it will inevitably be polluted by the outside world, so that the microorganisms will multiply in it. If contaminated cosmetics are used, various skin conditions such as local inflammation, acne, and pigmentation may be induced. Therefore, cosmetics that have been stored for more than one year are not suitable for use in principle.

Click Lotion Pump to learn about more information

DIY KEXON Lotion Pump and an Amazing Lotion Recipe

I wanted to share with you for making rhinestone monogrammed Lotion Pump(KEXON) I also wanted to share this recipe for an amazing lotion that has pretty much changed my life the past few months. If you need a gift idea, this combination of lotion with the monogram pump is so easy! So first, let me tell you about this lotion recipe because I have been so excited to share it with you guys!

A friend gave me a jar of this lotion for Valentine’s Day in a mason jar. I kept it by my sink and started using it every day and after a couple days, I looked at my hands and arms and could not believe how smooth and great they looked. I have the worst hands after growing up in the frozen tundra of Minnesota and have always been self conscious in how old they look after years of cold and dry weather. I have tried everything imaginable and nothing has ever helped.

After a couple weeks of using the lotion, my hands and arms began to look like they did in my 20’s (I’m in my 40’s). I know that’s so crazy to say that but the difference has been so incredible for me because they are smooth, very hydrated and so much younger looking. I called my friend Samantha and asked her what the heck she put in that jar!? She texted me the recipe and I could not believe what was in it, just a few inexpensive products;

Click Cream Jar to learn about more information

Foam Pump Bottle Use

As the Foam Pump(KEXON) is used, there is balance aqueous on the screen. If the pump is not acclimated frequently, that soap aqueous can dry, creating a blur on the awning which can ultimately clog the awning authoritative the pump harder to use.

The pump apparatus has a baby bulk of adipose in adjustment to accumulate the pump affective smoothly. While I haven’t been able to get acceptance from the manufacturer, it seems that some soaps eat abroad at the lubricant, abbreviation its capability over time. So far I accept not been able to analyze why the adipose is afflicted by some soaps and not others.


If you accept agitation with the pump, decidedly the pump “sticking” and not bustling aback up, analysis the afterward things:

Is the soap too thick? This is a accepted botheration with the pumps. To plan in the cream pump bottles the aqueous should be water-thin. If it is too thick, the pump will not plan appropriately and/or can be assuredly damaged. To resolve, access the concoction amount or use a altered soap.

Is there aqueous in the air chamber? You should see it central the alcove beneath the pump. If so, about-face it upside down and pump a few times which should get the baptize out of the air chamber. If that doesn’t plan (and if you are brave) yield the pump apart, apple-pie it completely, dry thoroughly and reassemble.


Click Cream Jar to learn about more information

Measuring Dip Tubes for Lotion Pumps & Treatment Pumps

The neck finish and dip tube length are two essential measurements when matching Lotion Pump(KEXON) and treatment pumps to containers, because the neck finishes must match for a secure fit and the dip tube length must be compatible with the height of the bottle.

Dip tube lengths measure from the gasket to the end of the dip tube and correspond to the measurement of the containers from the shoulders to the base. KEXON has created a cap codes reference document to assist in matching caps to the appropriate bottle. Be sure to match the cap code listed on the desired closure with the appropriate containers. The Addons menu is another excellent feature for matching containers and closures on any product page. Once selected, the Addons drop down menu will display compatible options for pairing and buying all in one place! KEXON highly suggests testing lotion and treatment pumps with the selected containers to ensure compatibility.

Ningbo KeXon Plastic Co., Ltd. is a comprehensive plastic packaging enterprise integrating design, production, and sales. We own a factory (Yuyao KeXon Sprayer Factory), and its plant area is over 6,000 square meters, with more than 20 years of production experience in various types of daily packaging. The company can professionally produce all kinds of foam pumps, plastic caps, daily and medicinal plastic bottles, as well as all kinds of trigger sprayers, lotion pumps, perfume sprayers, cream jar and other products.

Click Plastic Pump to learn about more information

What are the Benefits of a Beauty Trigger Sprayer

This is called steaming machine. The hot steam is scattered and distributed on the cleaned skin. Trigger Sprayer(KEXON) can open the pores, soften your horny and facilitate subsequent maintenance work, such as removing blackheads, exfoliating, and steaming before making masks. It can most effectively absorb the nutrients in the mask, and this hot steam also has a certain whitening effect.

Steamed face machine with cold steam, the effect is better, because after the benefits of hot steaming, after finishing the blackhead, or the horny, after the mask is done, the pores of the skin can be contracted. The pores after maintenance are fine and delicate, and the cold steam has a certain calming and oil control effect~! So this is very useful.

Hey, give you a small suggestion, it is best to add pure water in the home beauty hot and cold spray machine, that is to buy and drink, it is best not to directly add water in the water pipe, because the tap water contains chlorine, There will be precipitation on the skin for a long time.

Ningbo KeXon Plastic Co., Ltd. is a comprehensive plastic packaging enterprise integrating design, production, and sales. We own a factory (Yuyao KeXon Sprayer Factory), and its plant area is over 6,000 square meters, with more than 20 years of production experience in various types of daily packaging. The company can professionally produce all kinds of foam pumps, plastic caps, daily and medicinal plastic bottles, as well as all kinds of trigger sprayers, lotion pumps, perfume sprayers, cream jar and other products.

Click Lotion Pump to learn about more information

Are Lotion Pumps Hard to Find

I’m going to go into this assuming you know foaming soap is a rip off. You know that, right? You pay the same, or more for Foam Pump(KEXON) soap and for that you get – less soap. Here’s how to make your own.

It’s the little things in life that get me all riled up and in a good mood. Remembering I have leftover pizza in the fridge. Watching squirrels scurrying around trying to find hiding places for their nuts in the fall.. Finding out Home Depot now carries the 2″ galvanized pipe elbows with a double sided, screw in end. You know. The little things. Foaming soap is one of those little things. I love it. It’s easy. It comes out puffy and lathery without any work on your part at all. That’s right. I’ll spend 12 hours stacking 2 full, bush cords of wood, but I’m too lazy to lather.

The one thing I don’t like about foaming soap dispensers is refill soap for them is harder to find than regular soap and is usually more expensive. Even though you’re getting less soap. Because 500 ml of regular soap = 500 ml of regular soap. 500 ml of foaming soap is actually only a tiny bit of soap and a bunch of water.

So I figured out how to turn regular liquid hand soap into the sort of soap that will work in a foaming dispenser. Regular liquid hand soap won’t work in a foaming dispenser because it’s too thick. So genius me decided I could probably just add water to it to thin it down. Genius me was right. Getting the proportions right isn’t even difficult. It’s pretty forgiving. It’s foaming soap, not an atomic bomb.

Click Foam Pump Manufacturers to learn about more information

Foam Pump Performance

That too much clearance between the rotor and the groove will degrade the performance of Foam Pump(KEXON). Therefore, it is necessary to ensure reasonable tolerance fit and tolerance value of form and position, pay attention to the thermal expansion of the rotary blade, avoid the brushing of the rotary blade and groove, pay attention to the cold oil viscosity of the oil, and design enough spring force of the rotary blade. When using circular arc surface separation, the additional eccentricity value of the rotor center should not be too large. Otherwise, when the blade passes through two circular arcs, it will break away from the cylinder wall at the intersection point, which will cause impact noise instead. Generally, small pumps are 0.20-0.25 mm, and large pumps can be enlarged appropriately.

The sound of pressure oil in exhaust dead gap and pressure oil in residual volume. When the Foam Pump reaches the limit pressure, the two pressure oils will be injected into the vacuum chamber at high speed when connected with the vacuum chamber, and will impact with the rotor and cylinder wall to produce sound. The size and location of the two volumes are related to noise.

The larger the amount of inhaled gas, the more circulating oil the Foam Pump has, the greater the noise of the valve plate, the higher the valve jump, the larger the area of the valve, the greater the noise of the valve plate, and the material of the valve plate has a certain impact. The noise of rubber valves should be better than that of steel plates or laminates. Therefore, to control the oil inflow, the valve should be closed in time and tightly. Pay attention to the material selection and structure of the valve. The noise will increase with the increase of the echo and bubble burst sound volume in the chamber. Therefore, the noise will increase obviously when the air is opened or in the air. If the gas ballast can be adjusted, the gas ballast can be adjusted reasonably.

Noise emitted when a large amount of gas and oil are discharged and impacting parts such as oil baffles. If the parts are not rigid enough or not tightened, vibration and collision will occur, which will increase the noise. Therefore, not only should the oil baffle be rigid enough and tightened, but also when contacting with other parts (such as oil tank), rubber clamping method can avoid collision noise caused by vibration and improve the oil-retaining effect.

Click Foam Pump Manufacturers to learn about more information

Having Trouble Unlocking Foam Pumps?

The solution to the hard to open Foam Pump(KEXON):The trick is to make sure that the screw cap is tightened down all the way on the bottle. This will prevent the small circular disc directly under the foam pump itself from spinning. As long as that disc is locked in position, the foam pump itself should unlock when twisted. You can also help hold the disc in position with your thumb to keep it from spinning.

A whilte ago I purchased the gallon bottle. I am down to half and find that the foam pump is not working properly. I have tryed to tighten it, loosen it, squeeze the bottle and nothing. I have had to take out the pump completely and turn on its side and squeeze the conditionaer out. Why is that?I cannot get this pump to pop. I have tried everything. I do have arthritis in my hands so it is somewhat painful to try and hold onto this while trying to maneuver it open. Since the pump is sent separately, why does there have to be a lock on it?

The foam pump wasn’t hard to unlock, but actually pushing the foam pump to spray my replenishing treatment onto my hair is extremely difficult! It must be done with both hands and that is just awkward. I can barely use it due to this issue, but I love the stuff the couple times my daughter has offered her assistance.

Ningbo KeXon Plastic Co., Ltd. is a comprehensive plastic packaging enterprise integrating design, production, and sales. We own a factory (Yuyao KeXon Sprayer Factory), and its plant area is over 6,000 square meters, with more than 20 years of production experience in various types of daily packaging. The company can professionally produce all kinds of foam pumps, plastic caps, daily and medicinal plastic bottles, as well as all kinds of trigger sprayers, lotion pumps, perfume sprayers, cream jar and other products.

Click Foam Pump Suppliers to learn about more information

Custom Plastic Foam Pump Bottles

Custom plastic Foam Pump(KEXON) bottles can lend your product a unique identity that helps it to be easily identifiable and, with greater brand recall, you have a competitive edge in any market. If you have a product that is primarily meant for retail sales, you should consider getting custom plastic bottles for your product.

Plastic Foam Pump bottles are available in vast range of sizes, finishes, colors and even materials. You may want PET, HDPE, LDPE or any other material that comes under the generic plastic umbrella. Custom plastic bottles have many advantages like being Weatherproof, Unbreakable, Long-lasting, Impervious to the contents, Can take different closures, Lightweight, Easy to transport and place on shelves,Recyclable or reusable, making them eco-friendly.

Because of all these qualities, increasingly manufacturers are turning to plastic bottles for their products. Whether you are manufacturing shampoo or other toiletries, beverages, crushes and drinks, household utility products like cleaners or pesticides, or industrial use products or even pharmaceuticals, you may want to switch over to plastic bottles instead of glass or metal or any other material.

Additionally custom plastic Foam Pump bottles can be labeled in different ways, with the labels either printed on in various ways or made of paper or plastic and adhered to the bottle – labeling plays an important role in branding a product. Plastic bottles can be clear or opaque, thick or thin, depending on whether you want your product to be visible or not. Their mouths can be narrow or wide according to product requirements.

Click Foam Pump Manufacturers to learn about more information

Plastic Foam Pumps are Ideal for a Business

There is so much innovation accessible today and a few people are notwithstanding going so far as to introduce soap containers in their kitchens and bathrooms. These containers apportion cleanser into your hand by utilizing a straightforward sensor. This implies you don’t need to stress over touching anything and entirely cleaning your hands. These China Foam Pump(KEXON) are ideal for a business, for example, restaurants, offices, hospitals thus substantially more. The reasonable cost enables you to buy the same number of as you require without worrying about being out of the spending that you may have set for yourself.

For manufacturers of different types of cosmetic products, household liquids, gels and foams as well as chemical product suppliers, demand of different types of small to large bottles are common that are required along with pumps. The plastic foam pumps are widely used with cosmetic products and household chemicals that include mousse foam cleansing, hand washing liquid, hand sanitizer, facial cleanser, and shaving cream, hair conditioning mousse, sun protection foam, spot removers and baby products. Such pumps are used at the place of bottle cover to pour and get some liquid or soap. It is the best source that keeps the foam inside the bottle protected from direct sun and any kind of damage.

At the time of bushing bottles with liquids or foams, these pumps are acclimated abundantly that aswell accompany to you a area of added benefits. Selection of the right type of pumps depends on the bottle for which you are using them. If you are looking for such plastic foam pumps in bulk for your manufacturing unit to fill bottles and use them, you can get them directly from the top manufactures in a variety of models and directly to your address.

Click Foam Pump Suppliers to learn about more information