At the Global Mobile Broadband Forum, Huawei announced the first modem routers (“CPE”) for the new 5G cellular standard. The company has two devices in preparation, one for the C band (frequency range between 3.5 and 5 gigahertz) and one for the millimeter wave range between 26 and 28 gigahertz. Although the two 5G routers still have some drawbacks such as an enormous energy consumption to fight, yet it is likely to be the first commercially available 5G devices.
Huawei 5G router for C-band feature
Compared to a current LTE router like Huawei B618 , the Huawei 5G WiFi router for use in the C-band between 3.5 and about 5 GHz is quite large and heavy, but the first 5G devices are safe to handle. According to the manufacturer, the Huawei 5G router should be equipped with two RJ45 Gigabit LAN ports and WLAN 802.11ac (2.4 GHz and 5 GHz). The 5G C-Band Router is backward compatible with the 4G LTE standard and comes with a 2T4R antenna configuration, which means: data can be received on four antennas while sent via two antennas.
Huawei 5G router for mmWave feature
The Huawei 5G router for the millimeter-wave frequency range between 26 and 28 gigahertz is visually hardly distinguishable from the sister model for the C-band. But there is one important difference: millimeter waves can hardly or never enter buildings, so a line of sight to the 5G transmitter is required. This is done by an outdoor unit (ODU) integrated with the entire modem technology. The indoor unit (IDU) features all the connections and the WLAN technology. The indoor and outdoor units are connected via LAN cable, the power supply of the outdoor unit is realized via Power over Ethernet (PoE).
High energy consumption from the Huawei 5G router
As can be seen on the data sheets shown above, both Huawei 5G devices have an enormous power consumption, at least under load. The C-band model consumes up to 120 watts, while the mmWave model even up to 146 watts. So when the 5G router working, the power consumption is more like a gaming notebook rather than a router. For comparison: common LTE routers such as the Huawei B715 LTE router consume up to 12 watts during heavy load, ie one-tenth of them.
However, Huawei emphasizes that only the first generation of the 5G modem will have such high energy consumption. It is also likely that commercially available 5G routers will have a newer chipset and thus lower power consumption.
It’s said that the 5G networks would be launched in many countries and areas, so as the next generation of 5G mobile phones. As an important application, 5G router would be also an important part for 5G connection and surfing. The UK provider Three released its first 5G home access point from the Chinese network equipment supplier Huawei. Three UK owns 100 megahertz of radio spectrum in the range around 3.7 GHz and expands its 5G net with this spectrum. Huawei can provide both the network technology and the appropriate terminals for 5G.
5G can be used for a variety of purposes, but fast Internet for the home is probably the first application that will be introduced over a large area. With the 100 MHz wide spectrum that Three UK has available for 5G, it is theoretically possible to achieve up to 2 gigabits per second – which is about twice as fast as the currently most powerful LTE connections. What is more interesting than the top speed is the average speed, which should be at 1 gigabit per second. Compared to LTE, that’s a big step forward. A 5G connector can not only easily replace a VDSL supervising connection, but even achieves speeds previously only possible with fiber optic connectors.
Although Huawei already presented the first 5G router in 2017, it is now being used in practical use for the first time. It is the 5G router model for the so-called C-band, ie the frequency range between 3.4 and 3.8 gigahertz. Externally, the router is inconspicuous therefore and does not differ from an ordinary 4G LTE router
. The router would certainly not win a design prize, but the technology dominates.
The Huawei 5G C-Band Home Router
can also use LTE in addition to 5G, as shown in the datasheet below. Wi-Fi is supported at 2.4 and 5 gigahertz. There are two Gigabit LAN ports on the back, plus some LEDs and a SIM card slot. Whether or not eSIM is supported, Huawei didn’t tell. The power consumption is up to 120 watts – 10 times as much as a normal LTE router!
Even the 5G available in near future, you cannot buy the Huawei 5G router
, presumably, the 5G router will only be available via some specific providers in some countries. But we suppose there will be more and more 5G modem routers available as time goes.
Recently, the US mobile operator AT&T launched the first mobile 5G hotspot which comes from the Netgear. The 5G device is named Netgear Nighthawk M5 Fusion, which receives and transmits data via an integrated 5G modem and then forwards the Internet connection via LAN and WLAN to other devices. The new hotspot includes a Qualcomm X50 modem, the first consumer 5G modem. 5G is supported in the millimeter-wave range by 26 GHz, in this frequency range, the provider AT&T launches the 5G expansion in the US. Whether the range between 3.5 and 3.7 GHz is supported by the modem, which is used in many other regions of the world for the launch of 5G, is currently not known.
AT&T didn’t confirm other specs for the Nighthawk M5 Fusion (we got the name from an image title on AT&T’s press site), but we think it also has a Qualcomm X20 modem for gigabit-plus speeds on LTE.
The announcement by Netgear and AT&T was made in late October 2018 as part of a 5G test in Waco, Texas. The 5G network technology gets from Ericsson. AT&T plans to launch the 5G network in at least 12 US cities by the end of 2018, and by early 2019, 5G will be available in 19 US cities.
The Nighthawk M5 Fusion
looks like Netgear existing Nighthawk M1
, and the revealed product image of the new Netgear Nighthawk M5 5G hotspot shows the Nighthawk M5 in cuboid design and with a large display on the front. There are no other technical details yet, so it is unclear how long the battery life will be in 5G operation and what connections the device offers. Neither AT&T nor Netgear have provided information on the maximum speed.
The M5 Fusion model from the Nighthawk series will probably be among the world’s first commercially available 5G router
and it’s also should be the first Netgear 5G Router
& ATT 5G Router. It’s said it would be available in 2018 for the launch of the AT&T 5G network in the US. Details of the technical equipment were not released yet, but the Nighthawk M5 should be the successor of the Netgear Nighthawk M1. We will keep updating the news and detail specifications about Nighthawk M5.
Sourcing from https://www.4gltemall.com/blog/netgear-nighthawk-m5-worlds-first-5g-mobile-hotspot-released/