You can choose from No Sensor-AC Floodlight a variety of designs

Solar garden lighting system is one of the best ideas to brighten your garden’s beauty and attractiveness and also to provide other benefits to the owner. While the cost of acquiring and installing them would require a sitting down to compute the cost and provide the budget for the lighting materials. The cost alone would put the gardener into a quandary whether to install them or search an alternative lighting fixtures. But experience dictates that solar are the most sought after in this type of electrical lighting system because of their beneficial lighting features despite the cost involve in acquiring them. The attendant increase in your electric consumption must also be considered before finally deciding to buy and install them.

These solar lighting fixtures are good for your landscaped areas to focus on rocked designed contours of your garden and also to provide lighting to your path walks along the garden and there are solar ornamental designed lamps that you can be draped in bushes to make them lively even after the sun has already settled down or at its sunset level. These great outdoor lighting fixtures are also used to give added freshness to your green leafy vegetables if you want to focus some of them on your plants to show off your best produce.

You may also consider using other types of lighting fixtures for your pools and ponds underwater or for their underside lighting requirements to create an impressive colors and clarity in your bodies of water using electrically operated lights. You can choose from No Sensor-AC Floodlight a variety of designs and colors which could be programmed on the beat of the music or at a choose interval of a minute or any fraction of time. But again, these are added chunks on your budget but they would be worth the cost on you investment if you are on a commercial undertaking. If you are not, and on a purely personal liking or hobby, you may save on trimming down their numbers and sophistication and choose the best item that could give the lesser cost of maintenance and just concentrate on other creative ideas that would further enhance the beauty of your garden.

Other water-using fixtures in your garden such as fountains and grottos can further enhance their beauty by using spotlights or camouflaged illuminating lights that are focused or at a programmed time also. Another use of these various electrical lighting fixtures is also equally important in the security of your area against illegal intruders during the night. First, they must be adequately lighted and your perimeter area is a priority and that the installation must be a few meters away. Secondly, the dark corners and alleys of the garden where intruders may hide or take refuge in case of detection must have adequate light.

With all these lighting fixtures in place and the related cost involved in putting and maintaining them, your garden would be a paradise in the middle of the night and your family and friends as well as visitors alike would be enjoying with much happiness in your place and you will be equally rewarded with those smiles of approval in their faces.

Installing LED lights all over the ceiling is not a smart solution

Do you love to cook but often find the ambience of your kitchen dull and dreary? Does the kitchen feel unwelcoming after a busy day? Well, better lighting is essential to showcase the best features of any room. Yet it is the most ignored feature in modern kitchens.

Lighting Tips for the Kitchen of your Dreams!

Installing LED lights all over the ceiling is not a smart solution. In order to make the kitchen warm and welcoming, you need to have a good lighting design that blends ambient, task and accent lighting well. Here are some essential tips to help you get started:

1. Start with Sunlight

A good electrician knows the importance of natural light. It can instantly add brightness to any room plus save you from exorbitant energy bills. If your kitchen is not receiving enough sunlight, discuss the need for skylights, sky tunnel lights and solar tubes. On average, the installation of skylights can cost you $1500. But they do a great job at illuminating the kitchen without any massive recurring expenditure. You can even consider installing a window in a cramped, dull kitchen so as to make it airy and comfortable.

2. Build an Ambience with Ambient Lighting

Create a warm ambience by choosing the right ambient lights. Make sure that you create soft glow all over the kitchen without any harsh glare. Different types of ambient lighting include recessed lights, track lights, wall sconces, wall lights, etc. A typical round LED recessed light panel will cost you $25-$60. Track lighting kits often cost the same. The total cost can increase depending on your choice and the number of panels. You will have to pay $100-$200 as labor.

3. Take Task Lighting Seriously

Task lighting is very important to help you prep meals easily. The most common place to install task lighting is under the cabinets. Under-cabinet lights do a great job of highlighting the backsplash as well as provide lighting for reading recipes on the counter. LED strip lighting can cost you around $50-$60. Remote-controlled puck lights are slightly expensive but they can add a touch of glamor to the area. For a modern kitchen, choose motion activated lights.

4. Accent Lighting to highlight the Kitchen

Often used to add layers to the kitchen lighting design, accent lights can help you build a kitchen of your dreams. You can use accent lighting to illuminate the insides of the cabinets. For example, if you want to focus on fine china, dinner set or glassware, you can install recessed lighting inside the cabinet. It ranges from $40-$100 depending on your requirements. You can also use accent lighting to highlight kitchen toe-kicks. They can double up as safety lights.

5. Decorative Lighting is the Key!

Every kitchen needs to have one wow factor. And, pendant lighting can be the perfect way of doing it. Decorative lighting comes in different shapes and sizes. It can serve multiple purposes as well. For example, you can install decorative lights above the kitchen island as task lighting and still enhance the appearance of the room. When it comes to decorative lighting in the cooking area, the sky is the limit. A simple clear glass light fixture can be purchased for $25 and a crystal chandelier can cost several hundred dollars.

Find an Experienced Electrical enovation Expert!

When you are renovating the kitchen, consider working with an expert. Electrical renovation requires studying the layout of your kitchen in detail and then, providing a lighting design plan. If you want a bigger bang for your bucks, hire a licensed electrician. Doing extensive electrical work on your own can lead to code violations and expensive repairs. So, make sure that you leave the electrical work in the hands of a specialist.

Have now advanced somewhat and the use of any form of LED circular light

The first time of circular light to be used was back in 1952 and this was originally invented to be used for dental photography purposes. However things have now advanced somewhat and the use of any form of LED circular light is becoming increasingly popular. Not only are these types of lights still being used by the dental industry but also in homes and other businesses as well.

The reason why this type of light is proving so popular is because it can be used in a variety of different ways, because of its design. A typical circular light will cost of two parts, the power source and the light unit. Either the power is provided by a battery or by being connected to a mains electricity supply. As for the light unit generally this is made up of several small lights grouped together which surround a lens and which helps to spread the light out.

However when it comes to the LED circular light these differ from the other types of circular lights you can get. The first difference being that these lights work by combining electrons with electron holes, which help to release energy (photons) that creates the illumination.

What you will discover is that the light emitted by these is much brighter and whiter than that emitted by the traditional forms of circular light. As a result of this far fewer of the light emitting diodes (LEDs) need to be included in the light to help produce a good level of light for working with.

But it isn’t the brightest of the light that these emit that is making them increasing popular today. The other reason why people including those involved in any kind of scientific work are choosing to use this type of circular light is because they distribute the bright light over a much larger area. Certainly being able to see things more clearly is important to ensure that the right tests are performed.

Another reason of course why the use of any kind of LED circular light is proving popular is that they are much more energy efficient and so making them more cost efficient. These types of lights tend to use 66% less electricity to provide them with the energy needed to create light. As a result this will help to keep the costs of operating any equipment, which such lights are fitted to down. In some cases the savings you building work floodlight Manufacturers make annually on your electricity bills could be as much as 40%.

As well as being more cost effective because they use less electricity they are also save you money because they don’t require replacing as often. These types of lights don’t generate the same level of heat as conventional circular lights do which means that they are much more durable. Also these types of lights don’t contain any chemicals to help generate light so they aren’t releasing harmful gases into the air that could not only be detrimental to your health but also to the environment.

Nowadays LED light bulb are used for many lighting applications

Nowadays LED light bulb are used for many lighting applications. The reason for their becoming so popular is their energy efficiency. In fact, they have already proved to be a better option to incandescent and fluorescent lamps, which we have been using for a long time.

If you are thinking of how to replace your lighting system with new residential LED ceiling lights, then you are probably reviewing all of the information about this technology and what such a change needs. But, if you are not knowledgeable about the differences between the two, you may be hesitant to pay the upfront costs that come with installing residential LED ceiling lights.

You will want to make sure you know what these lights are and how they work. This type of light gets its name from the fact that it is based off a light emitting diode. In fact, these little plastic pieces are not bulbs at all but rather are very small semiconductors that have been cordoned off and separated by a plastic dome. This dome assists to protect the light that is being emitted as well as focuses it on a specific area.

An LED light can work upto about fifty thousand hours. Of course, its life depends under which conditions it works. Under ideal conditions, it should not be exposed to moisture and excessive cold or hot temperatures.

LED lamps are available in white, green, red, blue, white or amber colors. The color emitted by a diode is decided by the energy gap of the material used for making its p-n junction. The composition of a diode is a slice of N-type material, carrying a negative charge and another slice of P-type material, with a positive charge, having electrodes at either end. The point where the two kinds of materials are joined forms a p-n junction. The energy gaps of different types of p and n materials are different and measured in terms of wavelengths, which results to having light in different colors.

When light is to be directed to a particular point, you can employ LED lights. Compared to traditional options of lighting, these lights prove much more fitted for this purpose.

Usual incandescent lamps are notoriously energy inefficient. Nearly ninety percent of their energy consumption gets wasted due to the heat produced by them. Conversely, LED lamps consume 75% less energy compared to incandescent lamps, and produce just 3-4 BTUs/ hour, while incandescent lamps produce 85 BTUs of heat.

The energy consumption of LEDs is just 2-10 watts. That is 1/3 to 1/30 of what is consumed Wall Mounted Floodlights Supplier by incandescent lamps or CFLs. The lifespan of an LED bulb is 35-50 times more than incandescent lamps and 2-5 times more of fluorescent lamps. As per the estimates of the U.S. Department of Energy, extensive use of LED lighting during the coming twenty years can help saving nearly $265 billion, amount enough for making forty additional power plants, thus reducing the demand of power for lighting by about 33 %.

A wider beam of light can be generated by bunching together a number of LED light bulbs. A process using low-priced silicon wafers in place of pricey sapphire-based technology has already been developed by the researchers of the Purdue University. These developments would help a lot in replacing the usual incandescent and even CFL bulbs.

Also, it is difficult to LED Work lights Suppliers find an LED system

Choosing a Pond or Fountain Light: LED or Halogen?

Basically, there are two kinds of lights available for ponds, halogen lights (which have been around for quite a while), and LED, which are more recent developments. Here are some differences between the two. Note that here we are addressing 12volt systems only.

Some advantages of LED:

Focused light
Solidly built and hard to break, durable
Last twice as long as best fluorescent bulbs and 20 times longer than incandescent bulbs LEDs also are more efficient per watt, produce greater lumens per watt than incandescents or halogen bulbs. LEDs can be built in a number of colors so do not require a filter, which greatly reduces efficiency of light. Finally, LEDs run cooler and are less likely to warm the pond or for their seals to get damaged because of the cooler running temperatures.

Some Disadvantages:

LED lights are still quite expensive and it is taking a while for the price to drop. Also, it is difficult to LED Work lights Suppliers find an LED system that produces high wattage. Fountain Tech  produces the highest pond light wattage we know of at 8 watts per light fixture. And a total of 130 separate LEDs are used in the fixture to do this!

Halogen:

Some Advantages

These are good lights, not as durable as LEDs but pretty durable all in all. The most common sizes are 10 watt, 20 watt, 35 and 50, though you can also find 75 watt lights. You can usually buy lens covers to change the color of the light, though lens filters do reduce the luminosity a great deal. In general, it is more efficient to use colored bulbs. Still, you will find less light from a colored bulb than a clear one. LED is the way to keep luminosity efficient when using colored light. You can find a good selection of both at Cheap Pumps. Some Disadvantages:

These light bulbs don’t last nearly as long as LEDs, though they still last a long time. They burn quite hot and sometimes the high temperatures burn the O-rings and the fixtures leak.

About transformers:

Transformers that will be used outside (as almost all will!) really need a 3-prong plug. Beware of the ?for indoor use only? transformer as, in order to find an indoor plug and then run the cable to your fixture outdoors these are often more trouble than the price savings is worth. Find a UL-approved transformer that can be used in or out of doors. That’s our recommendation.

Light is vital to the existence of all living things

Light is vital to the existence of all living things.  You need the natural sunlight to provide you with a controlled amount of ultraviolet rays. Just like the tanning bulbs, it could provide you with a change of skin tone because the bulbs contain ultraviolet A and B rays. But excessive amounts of the sunlight could dry your skin or damage it ? it is also the case with tanning bulbs.

Do you often visit a tanning parlor? Do you own a No Sensor-AC Floodlight Manufacturers tanning bed on your house? Do you really know how to use your tanning bed?

Here is some information in knowing your tanning bulbs.

* The Basics.  If it is your first time in a tanning salon, make sure you provide the experts with your skin condition. Sensitive skin would require a lower level of UV ray, so the intensity of the tanning bulb should be less than ordinary. If you have just purchased your own tanning equipment at home, make sure to do a research on the tanning bulbs you have bought. The level of the tanning bulbs would depend on the brand and model of the manufacturer. Be aware of the intensities the bulbs would cause your skin to be able to control the tanning process.

* Maintenance.  The placement of the tanning bulbs is important because if you fail to do this correctly, it could lead to your lamp to dim or resulting in an electrical power shortage. Make sure to clean the tanning bulbs when it is not in use because the cleaner the bulb, the amount produced of the UV increases 10%. Cleaning the tanning bulb is easy because id doesn’t require soap. Make use of moist cloth regularly to keep it dust and oil-free.

Plus, make sure to replace the starter of the tanning bulb every time you change the tanning bulb of your equipment. When you replace a new bulb, the UV level becomes higher and would permit burning of the skin. Make sure to purchase the exact brand name or identical to the tanning bulb you made use of earlier.

* Usage. If you are tanning in a salon, make sure that there are experts monitoring you through the whole process. There should be controlled exposure to the UV rays depending on your skin type, the tanning equipment and the model of the tanning bulb. If you are using your own tanning equipment and you believe that the tanning bulbs are aging and you want to extend tanning – that is a bad idea. The aging of the tanning bulbs does not necessarily mean that the effect of the UV rays is decreased.

Now that you know the important information in handling the tanning bulbs and its equipments. You should follow these guidelines in a enjoying a safe and relaxing tanning.

If you’re inside the tanning equipment, the fact that your eyes are shut closed is not enough. There is an eye-protection recommended by the FDA (Food and Drug Administration) and you could purchase it anywhere within authorized outlets. Without these protective gears, it could cause your eyes probable long-term damage.

The UV rays from the tanning bulb could make your skin dry. Since tanning when you have applied moisturized could work best in the beach or tanning parlors, it is healthier if you make sure to moisture your skin before and after exposing yourself to the UV rays.

Your skin produces melanin, but your lips don’t. Make sure to defend your lips from possible burning by using sunscreens or lip creams and ointments.

If you’re planning to expose your whole body onto the tanning bulbs, make sure to cover with a towel or cloth the parts that are not yet tanned. Then gradually remove the cloth after two or more tanning sessions.

And lastly, if you have problems with your health, remember to visit your doctor first before planning to go to a tanning parlor.  With the tanning bulbs producing UV lights, these could have a side effect if you’re on medication.

Here are the facts. Your job is to follow the guidelines to achieve in having a great tan in a safe environment. Know your tanning bulbs, so it could serve you for the better.

The common mind is like a 60 watt light bulb which gives off a pleasant, not very powerful light, able to light up a small room, so that we can see well enough to function. Its light is confined to the small room and does not penetrate the walls to light up what is behind them. Nor can it sufficiently light up a larger room.

Our mind in the same way is pretty much confined to the small room called our superficial, personal, conscious reality. It does not have the power to penetrate to the depths of realities, beyond social preconceptions and misconceptions. It is limited by childhood programming and automatic emotional mechanisms, which keep it limited the surface of things – superficial.

The light of the ordinary light bulb is scattered in many directions and radiates at many different wavelengths and frequencies. If we could take this 60 watts and direct all the energy in the same direction and make all the rays move at the same frequency, we would have a laser, which could burn a hole through the wall (of illusion) and expose the reality behind it.

That is the same energy when synchronized and focused in only one direction becomes much more penetrating. This is true of light and also of our mind.

Meditation is the process by which we can turn our 60-watt ordinary mind into a laser mind, which will then be able to penetrate to the source of problems and solve them easily. It will be able to burn through the veil of childhood programming and help us to see the truth about ourselves, others and the world around us.
Twenty minutes a day is not much of an investment for obtaining a laser mind, whose clarity and power can offer us a happier, more fulfilling life, as well as spiritual evolution and finally enlightenment Fixed battery series Suppliers.

It’s our choice. Even if we had all the money in the world we could not buy such a laser, nor can we steal it. Nor can anyone else build it for us.

Article Tags:         Small Room

How to avoid stroboscopic problems in LED lighting

Figure 2: As a conventional stroboscopic measurement – in this case, measured by ripple current – a sharp high drive display, the measured value remains below the relative perceptual threshold

  High-quality driver chip can greatly reduce stroboscopic occurrence

  Affected by the rectification of the supply voltage (50 Hz in European standards), a large portion of the ripple current in the LED drive is twice the frequency of the supply, approximately 100 Hz. Not only that, the LED can instantly convert the operating current into light compared to conventional light sources without any large smoothing effects. In order to achieve the best possible flash-free operation, high-quality LED drivers and compatibility between drivers, dimmers and LED modules are indispensable. The information in the data sheet is usually a method of evaluating the control device, such as by “output current ripple” or “overlay communication”. Typically, the value indicated is 100 Hz. The lower the value, the lower the risk of strobe.

High Power LED Light-L16-1001-1080W
High Power LED Light-L16-1001-1080W

  Today’s high-quality drivers, such as the Tridonic LED driver, minimize output ripple and work with perfectly matched components. Quality components have well-defined parameters that are constantly being tested in the lab. Manufacturers pay particular attention to critical frequency ranges around 10 Hz. Tridonic is seeking to define new market standards. For older generations of high-ripple devices, it is now only recommended for applications that don’t require people to be present.

Although LED is expensive for the new generation of lighting protagonists

According to Display Search at the 21st Display Search Forum, the forecast for the LED market pointed out that the demand for lighting LEDs has been calculated by the number of backlights, and has already dominated the detachable floodlight backlight LEDs, and will exceed the backlight LEDs in 2014. LeoLiu, senior LED analyst at Display Search Taiwan, said that in terms of LED demand in 2011, the number of LEDs for lighting was 13.29 billion and the number of backlight LEDs was 45,569 million. The gap between the two is about 3.4 times. In 2014, the demand for lighting LEDs and backlight LEDs will reach 58.58 billion and 50.463 billion respectively, and the LED market demand for lighting will officially surpass backlight LEDs.

Although LED is expensive for the new generation of lighting protagonists, the current proportion of the mainstream lighting market is still very small, LED is still dominated by backlighting applications. However, such a situation is likely to change in the next few years. It is understood that the demand for lighting LEDs exceeds that of backlight LEDs, mainly due to the gradual popularization of LED lighting, and the reduction in the number of LEDs used in the backlight panel of each liquid crystal panel device. LCD TVs and LCD monitors that use large-size LCD panels are currently the driving force behind the backlight LED market. Due to factors such as increased brightness of LEDs and lower product costs, the number of LEDs in these products will be less and less.

Display Search believes that the popularity of LED lighting will continue for some time, so demand will continue to increase. It is understood that in 2011, LED lighting products accounted for only 1.9% of all lighting. Even in 2014, the demand for lighting LEDs surpassed that of backlight LEDs, but its proportion only accounts for 9.3% of the lighting market, so the future growth space is still very large.

In devices using large-size LCD panels, LED backlights are now in the mainstream stage, so even if the number of LEDs used per product is reduced, the number of products is still increasing, so the demand for LEDs in the entire market continues to expand. However, after LED backlighting has reached a certain level, it is difficult to rely on the increase in the number of products to compensate for the decline in LED backlight usage, so LED demand will gradually slow down. Display Search predicts that the demand for backlight LEDs will reach its peak in 2013 and then gradually decrease.

Skip to toolbar