What a qualified spray bottle should have

The design of cosmetic packaging bottles is constantly innovated, from the beginning of the plastic cover, the extrusion cover to the final spray pump, each time in order to better store cosmetics and facilitate people’s use. So today we mainly know what are the advantages of cosmetic spray pump?

1. High quality environmental protection, good recycling;

2. Good sealing performance;

3. The dosage can be well controlled, and it can bring good convenience in many fields, such as medical treatment, and it is not suitable for smearing on wounds or in the oral cavity, so the spray pump will come in handy.

In addition to the advantages of the cosmetic spray pump mentioned above, there are also some problems that may occur, such as being blocked accidentally and stuck, which will be more troublesome. However, in the future, cosmetic spray pump manufacturers will also make improvements.

Ningbo KeXon Plastic Co., Ltd. is a comprehensive plastic packaging enterprise integrating design, production, and sales. We own a factory (Yuyao KeXon Sprayer Factory), and its plant area is over 6,000 square meters, with more than 20 years of production experience in various types of daily packaging.

If you want a spray bottle that is handy to use, you can click here: https://www.chinafoampump.com/

Research on plastic cosmetic pump heads of different models

Each type of plastic cosmetic pump head has a fixed pump output and an allowable error range. The plastic cosmetic pump head produced by our company has a standard pump output with small error and can ensure stable foam pump output.

The output of the emulsion pump with 24 teeth and 28 teeth was 2.0cc, with an error of ±0.2cc. This emulsion pump can be used for shampoo pump head, shower gel pump head, body milk pump head, hand sanitizer pump head and hair conditioner pump head.

The output of 33 teeth plastic emulsion pump head is 4.0cc, with an error of ±0.4cc. This emulsion pump can be used for shampoo pump head, shower gel pump head, body milk pump head, hand sanitizer pump head and hair conditioner pump head.

The output of the 30-tooth plastic foam pump is 0.4ccc, with an error of ±0.1cc. This pump head is rich and delicate in foam, suitable for cleansing bubbles, foam hand sanitizer, baby shower gel, baby shampoo, a comb black, mousse.

The pumping capacity of 40 teeth and 42/43 teeth plastic foam pump is 0.8cc, with an error of ±0.1cc. This pump head is rich and delicate in foam, suitable for cleansing bubbles, foam hand sanitizer, baby shower gel, baby shampoo, a comb black, mousse.

18 teeth, 20 teeth, 22 teeth, 24 teeth of plastic spray pump output is 0.2cc, the error is+/-±0.02cc. Spray pump sprays evenly, suitable for perfume spray, facial toner, cosmetic water, etc.

For the pump heads produced by our company, we have strict quality inspection departments to check and use professional instruments to check to ensure that the quality is qualified, the appearance is clean and tidy, and the packaging is intact before shipment. The video is a real shot of the company’s plastic foam pump output detection process. Think what the customer thinks, let the customer rest assured!

If you want to know more, you can click here: https://www.chinafoampump.com/

Consumer’s Feeling Sharing in Using Foam Pump

At present, daily chemical foam pump sold on the market, when in use, when the head is lifted upwards and pressed again, the sticking phenomenon will occur, which will affect people’s hand feeling when in use.

The working principle of daily chemical foam pump was analyzed, and it was found that lifting the head upward would cause negative pressure in the piston cavity of the water cylinder and the water cylinder, and the negative pressure would make the upper pull rod and the upper port of the piston of the water cylinder seal more tightly. At this time, when pressing the head, the upper pull rod and the top seal of the piston of the water cylinder need to be opened with greater strength to allow the bubble liquid to pass through. This greater strength makes people feel a sense of sticking.

Therefore, it is necessary to invent a foam pump to solve the above problems.

Ningbo keex on plastic co., ltd. has a high-level skilled and experienced r&d team and has long been qualified to independent research and development of new products. it can also provide customized services according to customer requirements.

If you want to find a good foam pump, please contact us: foam pump manufacturers.

Foam pumps can be divided into tie-in type and screw-in type

Foam pumps are used in many of our daily necessities, so today we will talk about the working principle of foam pumps.

Foam pumps can be divided into two types according to the distributor, i.e. binding type and screw type, and can be divided into spray, foundation cream, emulsion pump, aerosol valve and vacuum bottle in terms of function.

The size of the plastic pump head is determined by the caliber of the matching bottle body. The spray standard is 12.5 ~ 24 mm, and the water yield is 0.1 ~ 0.2 ml/time. It is generally used for matching perfume, gel water and other commodity packages. The caliber is the same, and the receiving length can be determined according to the height of the bottle body.

Special dispensers such as foam pump head and hand-held spray head, foam pump head is a non-pneumatic hand-held pump head, which does not need to be filled with air to generate foam, and only needs light pressing to generate quantitative high-quality foam. Generally, there are special bottles. Hand-held sprinklers are commonly used in cleaning agents and other commodities.

Ningbo KeXon Plastic Co., Ltd specializes in producing various foam pumps, plastic caps, daily and medical plastic bottles, as well as various trigger sprayers, emulsion pumps, perfume sprayers, cream cans and other products.

If you want to buy high-quality foam pump, please call for advice:https://www.chinafoampump.com/