Idea cellukar GPRS Settings

Posted on

GPRS Settings:

Connection name: IDEA_GPRS
Data Bearer: GPRS
Access point name: imis
User name:
Prompt password: No
Password:
Authentication: Normal
Homepage:http://wap.ideafresh.com
Connection security: Off
Session mode: Permanent
Proxy serv. address: 10.4.42.15:8080

Select Services, Choose IdeaFreshGPRS as the default access point.

MMS Settings:

Connection name: IDEA_MMS
Data Bearer: GPRS
Access point name: mmsc
User name:
Prompt password: No
Password:
Authentication: Normal Homepage = http://10.4.42.21:8002
Proxy serv. address: 10.4.42.15:8080

Select IDEA_MMS as default Access point in Multimedia settings.

AFTER THIS SWITCH OFF, THEN ON AND USE WAP BROWISNG + MMS.

OTA Settings for OTA handsets:

There are certain mandatory parameters for GPRS/MMS settings which needs to configure in every handset to enable it for GPRS/MMS servcies. These parameters are;

GPRS Settings

APN = imis ( in small letters)
Data Bearer = GPRS
Proxies = Enable
IP Address/Proxy Address = 10.4.42.15
Port No./Proxy Port No. = 9201 ( for WAP 1.0 handset ), 8080 (for WAP 2.0 handset)
Homepage = http://www.ideafresh.com

MMS Settings

APN = mmsc (in small letters)
Data Bearer = GPRS
Proxies = Enable
IP Address/Proxy Address = 10.4.42.15
Port No./Proxy Port No. = 9201 ( for WAP 1.0 handset), 8080 (for WAP 2.0 handset)
Homepage = http://10.4.42.21:8002
Alongwith this there is one more setting which is required for handset to be used as modem;

GPRS Modem Settings

GPRS = When Needed
APN = internet (in small letters)
Out of the above, some parameters which are optional for some handsets like Proxies and Port No. These depend upon the handset capability itself. In GPRS settings, the profile name or the connection name can be any thing. Normally for WAP, we keep IdeaFreshGPRS and for MMS, it is IDEA_MMS. These GPRS settings can be at different places in different handsets e.g. in Nokia, this is at Services, in Samsung, this is at FunBox, in Sony Ericsson, in Data Connection/Wap Browing..and so on. And the MMS settings are normally at the Multimedia Message Settings part. So you need to find the proper place to feed in the right settings at right place. To access wireless Internet you require

  1. A GPRS handset (There are many GPRS handsets available in the market today).
  2. Subscription to IDEA services.
  3. Laptop or PDA or any other device you want wireless connectivity to.
  4. Bluetooth/data cable/Infrared through which you can achieve connectivity between you handset and the other device.

To activate shackle free wireless Internet service by using your GPRS handset as a Modem

  1. Just contact our customer care on 12345 from your mobile phone or 9812012345 from anywhere and ask them to provision you for wireless Internet.
  2. Activating Idea Wireless Internet on your Laptop.

Adding a modem

To install a Modem driver, you must first install the Modem Setup Program on your Laptop/ PC from the CD provided with your mobile. During installation, keep your handset connected with the PORT (Bluetooth) of the device or thru data cable or thru Infrared. After installation, restart your Laptop/ PC.

Connectivity via bluetooth

Requirements:

  • Bluetooth Dongle & its Driver CD.
  • Bluetooth Enabled H/S.

How To?

  1. Insert CD in the system & install the software.
  2. Restart the system.
  3. Insert Bluetooth in the system & let the system install the Hardware.
  4. Start the Bluetooth of the H/S.
  5. Pair Device with the system.
  6. Go to Control Panel > Select Phone & Modems > Select the Required Modem (Bluetooth DUN Modem) > Go to Properties of that Modem > Select Advance TAB & insert Extra Initialization Command (AT+CGDCONT=1, “IP”, “INTERNET”)

  7. Press OK.
  8. Come back to the Bluetooth Window.
  9. Right Click on the H/S icon & select Refresh Services.
  10. Now Click on Bluetooth Dial-Up networking in the Top List of available services.
  11. Accept Connection in H/S.
  12. The system will automatically ask for Dial…just click on it & the system will get connected to NET automatically.

Connectivity via datacable

Requirements:

  • Data Cable (Serial or USB; compatible as per H/S model)
  • PC Suite & Driver of that particular H/S (Normally a CD is provided with the Data Cable itself) Appropriate Windows as per Data Cable.

How To?

  1. Insert CD in the system & install the software.
  2. Restart the system.
  3. Insert Data Cable in H/S & then to the PC/Laptop.
  4. Let the System install the Hardware.
  5. Go to Control Panel > Select Phone & Modems > Select the Required Modem (e.g. Nokia USB; Samsung Cable etc.) > Go to Properties of that Modem > Select Advance TAB & insert Extra Initialization Command (AT+CGDCONT=1, “IP”, “INTERNET”).
  6. Press OK.
  7. Now Select Network Connections in Control Panel.
  8. Click on “Create new Networt”.
  9. A wizard will start up. Click next.
  10. Select “Connect to Internet”. Click next.
  11. Select “Set up my connection manually”. Click next.
  12. Select “Connect using a Dial-up Modem”. Click next.
  13. Select Your Modem. Click next.
  14. ISP Name: (Any name could be written). Click next.
  15. Phone Number: *99#. Click next.
  16. Leave User Name, Password, and Confirm Password fields blank. Click next.
  17. Click on “Add a shortcut to Desktop”. Click on Finish.
  18. The system will automatically ask for Dial…just click on it & the system will get connected to NET automatically.

Connectivity via Infra-Red

Requirements:

  • Infrared enabled H/S.
  • Infrared port & its driver if the system has no in-built Infrared.

How To?:

  1. Insert CD in the system & install the software.
  2. Restart the system.
  3. Insert Infrared port in the system & let the system install the Hardware.
  4. Start the infrared of the H/S.
  5. The System will automatically detect & install “Standard Modem over IR Link”
  6. Go to Control Panel > Select Phone & Modems > Select the Required Modem > Go to Properties of that Modem > Select Advance TAB & insert Extra Initialization Command (AT+CGDCONT=1, “IP”, “INTERNET”)
  7. Press OK
  8. Now Select Network Connections in Control Panel
  9. Click on “Create new Network”.
  10. A wizard will start up. Click next.
  11. Select “Connect to Internet”. Click next.
  12. Select “Set up my connection manually”. Click next.
  13. Select “Connect using a Dial-up Modem”. Click next.
  14. Select Your Modem. Click next.
  15. ISP Name: (Any name could be written). Click next.
  16. Phone Number: *99#. Click next.
  17. Leave User Name, Password, and Confirm Password fields blank. Click next.
  18. Click on “Add a shortcut to Desktop”. Click on Finish.
  19. The system will automatically ask for Dial….just click on it & the system will get connected to NET automatically.

Did you know that if you subscribe to our website, you will receive email notifications whenever content changes or new content is added.
1. Enter your e-mail address below and click the Sign Me Up button.
2. You will receive an email asking you to confirm your intention of subscribing to our site.
3. Click the link in the email to confirm. That’s all there is to it!

Enter your email address below to subscribe to Beanyblogger.com.

Note: if you wish to unsubscribe from our site, click the unsubscribe link at the bottom of the email you received.
Then indicate you no longer wish to receive our emails.

Thank You
Beanyblogger.com

Posted in Mobile Sms Messages and tagged .

Leave a Reply